The LS3015HL at a Glance
In addition to providing increased production efficiency, the LS3015HL seamlessly integrates with Muratec’s highly-rated sheet metal automation systems. The FN3015TL large-capacity tower enables hours of unattended production through streamlined and reliable automated processing.
To learn more about Muratec’s efficiency-boosting fabrication equipment, contact our fabrication experts today.
FIBER LASER PROCESSING
Multi-function machine with fiber laser processing
In order to maximize the capabilities of the fiber laser, processing is performed on the laser pallet by the flying optics system.
FORMING PROCESSING
Support for various forming processes is done with upper and lower servo drives
Forming operations are performed on a stable brush table. Tool conditions in the control allow adjustment of all forming profiles.
TABLE SHIFT
Seamless table shift transfer from cutting to forming
Designed to maintain quality throughout cutting and forming processes, fork units transfer materials from the laser pallet to the brush table, utilizing work clamps to keep materials from shifting during transition.
TAPPING
High-quality rigid tapping unit
Servo-controlled tapping supports a large variety of machine and roll-type taps. Automatic chip vacuum, tap lubrication, and a tap breakage sensor are included.
Fiber Laser and Metal Forming Video
STANDARD
LS3015HL MACHINE SPECS & TECHNICAL DATA
- 120.8 in x 61.0 in
- 1322.8 lb
- 0.001 in
- 0.001 in
- 36.6 ft x 22.9 ft x 8.5 ft
- 2500 watts
4000 watts
6000 watts - 6692.9 in/min
- Flow Rate: 4.59 cfm | 130 NL/min
Presure: 71 PSI | 0.5 MPa - 1.0 in
- 0.63 in
- 0.25 in
- 0.25 in
- 0.5 in
- 0.63 in
.
METRIC
LS3015HL MACHINE SPECS & TECHNICAL DATA
- 3070 mm x 1550 mm
- 600.0 kg
- 0.03 mm
- 0.03 mm
- 11115 mm × 6925 mm × 2565 mm
- 2500 watts
4000 watts
6000 watts - 170.0 m/min
- Flow Rate: 4.59 cfm | 130 NL/min
Presure: 71 PSI | 0.5 MPa - 25.4 mm
- 16 mm
- 6.3 mm
- 6.3 mm
- 12.7 mm
Fabrication
Turning
Material Handling
Clean Room
Textiles