15%

More Parts

Designed for hyper-efficiency, shops with Muratec automated turning lathe machines have shown a production increase of 15% daily.

80%

Labor Savings

When compared to operator loaded/unloaded machines, Muratec machine tools can reduce labor cost by 80% annually.

$500

Maintenance Cost

Reliable by design, the average annual maintenance costs of Muratec CNC machines is as low as $500.

Achieve Business Stability Through Versatility

There’s no denying market stability is a common concern for all manufacturers. And on top of the uncertainty, changing demands and trends make it difficult to anticipate which parts are needed to regenerate growth. So as we look towards the future, what are part makers to do? 

The answer: add versatility to your shop floor. Although no one can estimate how much work it will take to smooth over unsteady markets, adding versatile machines to your workforce is sure to help stabilize your position in the manufacturing sector. Investing in machine tools with added versatility allows part markers to generate an assortment of parts and keep production in line with customer needs. After all, the more a machine can do, the more profitable it is in the marketplace.

For more than a decade, Murata Machinery, USA, has engineered turning centers for customers worldwide in support of continuous growth and economic drive. Armed with automatic gantry loaders, these machines are known for unbeatable speed and accuracy, and ultimately, the versatility to meet low- and high-volume production requirements. 

Capable of cutting exotic materials to produce tee fittings, bent fittings, cross fittings, 90-degree and angled parts, and fasteners at lightning speeds, Muratec CNC lathes are engineered to produce versatile parts categories. For these tight-tolerance operations, Murata Machinery offers two solutions that are distinctly designed to handle rapid throughput of high-quality pieces and are rated top-of-the-line for reliable production: 

MW35_machine-with-attachment MW35 machine with attachment

MW35: ALL-ELECTRIC Turning Center

For high-volume machining, Muratec’s all-electric MW35 twin spindle lathe delivers increased productivity and reduced energy consumption compared to hydraulic machines. Complete with fully-automated controls for unattended machining of small parts, the MW35 is capable of loading and unloading parts in three seconds or less. This turning center not only earns its keep but also receives the reputation as the most valuable asset on the shop floor.

MW40-machine-only MW40 machine only

MW40: FLEXIBLE, VERSATILE CNC LATHE 

Offering versatility and easy setup change, the MW40 stands apart from the competition when it comes to delivering small parts with super precision. Its twin spindles allow the MW40 to perform simultaneous operations from a single, self-contained source with a compact footprint. The MW40 was developed to provide minimal thermal displacement during operation making it an optimal solution for exact turning requirements. 

It’s a perfect time for manufacturers to look to added versatility to improve efficiencies and become more competitive amongst the uncertainty of manufacturing. Murata Machinery, USA’s team of engineers and service professionals are ready to help you better prepare for the future while improving your bottom line. 

ULTIMATE SPEED AND ACCURACY

A staple in automotive job shops across the US, more auto parts are turned on Muratec twin-spindle machines than any other lathe turning tool on the market. Armed with an automatic overhead gantry, these machines are know for unbeatable speed and accuracy, with the versatility to meet low- or high-volume production requirements.

MW40-machine-only MW40 machine only

MW40

Maximum Turning Diameter: 5.3 in
Number of Turret Stations: 10 STA
Total Machine Weight: 6,834.3 lb
Spindle Drive Motor: 3.7 kW/30 min *No option
Spindle Speed Range: 8,000 RPM
Maximum Chuck Size: 5.0 in

MW120EX-twin-spindle-machine MW120EX twin spindle machine

MW120

Maximum Turning Diameter: 9.4 in
Number of Turret Stations: 8 STA
Total Machine Weight: 9,700.3 lb
Spindle Drive Motor: 11 kW/30 min
Spindle Speed Range: 4,500 RPM
Maximum Chuck Size: 8.0 in

MW200GT_machine-with-attachment MW200GT machine with attachment

MW200

Maximum Turning Diameter: 13.8 in
Number of Turret Stations: 10 STA
Total Machine Weight: 15,873.3 lb
Spindle Drive Motor: 22kw/30m in
Spindle Speed Range: 3,500 RPM
Maximum Chuck Size: 10.0 in

THE JOB SHOP IN A BOX

Equipped with up to 15 cutting stations, Muratec’s twin opposing spindle machines are the ultimate turning solution for complex parts. These process multi-taskers offer high-precision synchronization during part transfer to deliver ultra-precise detailed parts in a fraction of the time.

MT12

Maximum Turning Diameter: 8.3 in
Number of Turret Stations: 15 x 2
Total Machine Weight: 12,345.9 lb
Spindle Drive Motor: 11kw/30 min
Spindle Speed Range: 4,500 RPM
Maximum Bar Size: Up to Φ51mm x 800mm

MT100

Maximum Turning Diameter: 7.5 in
Total Machine Weight: 17,637.0 lb
Spindle Drive Motor: STD:11kw/30min *No potion
Spindle Speed Range: 5,000 RPM
Maximum Bar Size: Up to Φ51mm x 620mm
Maximum Chuck Size: 6.0 in

MT200

Maximum Turning Diameter: 8.3 in
Total Machine Weight: 21,164.4 lb
Spindle Drive Motor: 15kw/30min *No potion
Spindle Speed Range: 4,000 RPM
Maximum Bar Size: Up to Φ81mm X 950mm
Maximum Chuck Size: 8.0 in

MORE PARTS, LESS OVERHEAD

Traditionally used for third operations in conjunction with twin spindle machines, the Muratec single-spindle turning centers are designed for high-volume production. In addition to high-speed processing and exceptional rigidity, these metal lathes have a compact frame for easy system integration and line planning.

MS50

Maximum Turning Diameter: 9.4 in
Number of Turret Stations: 8 STA *No option
Total Machine Weight: 4,850.2 lb
Spindle Drive Motor: 5.5 kW/30min *No option
Spindle Speed Range: 4,500 RPM
Maximum Chuck Size: 6.0 in

MS60G_machine-only MS60G machine only

MS60

Maximum Turning Diameter: 9.4 in
Number of Turret Stations: 8 STA
Standard Spindle Speed: 4500 RPM
Total Machine Weight: 5,511.6 lb
Spindle Drive Motor: 11kW/30 min
Maximum Chuck Size: 8.0 in

MS90_machine-only MS90 machine only

MS90

Maximum Turning Diameter: 13.8 in
Number of Turret Stations: 10 STA
Total Machine Weight: 8,818.5 lb
Spindle Drive Motor: 22 kW/30 min
Maximum Chuck Size: 10.0 in
Total Machine Weight: 6,613.9 lb

ONE MACHINE, MULTIPLE PROCESSES

The Muratec live-tool turning centers deliver ultimate process efficiency by combining milling and drilling processes into a single, high-performance machine. With an integrated 3-axis gantry loader and compact footprint, these vertical turning lathe machines perfectly complement lean operation and flexile line planning.

MD60

Maximum Turning Diameter: 9.1 in
Number of Turret Stations: 10 x2 *No option
Total Machine Weight: 5,291.1 lb
Spindle Drive Motor: 11kw/30 min
Spindle Speed Range: 4,500 RPM
Live Tool Maximum Speed: 4,000 RPM

MD100

Maximum Turning Diameter: 13.8 in
Number of Turret Stations: 10 x2 *No option
Total Machine Weight: 9,259.4 lb
Spindle Drive Motor: 22kw/30 min
Spindle Speed Range: 3,500 RPM
Maximum Chuck Size: 10.0 in

MD200

Maximum Turning Diameter: 13.8 in
Number of Turret Stations: 10×2 *No option
Total Machine Weight: 16,314.2 lb
Spindle Drive Motor: 22kw/30 min
Spindle Speed Range: 3,500 RPM
Maximum Chuck Size: 10.0 in

LONGER PARTS, FASTER

Muratec’s specialty machines are specially designed to turn longer-than-usual parts with ultimate speed and precision. For parts that require tight tolerances, these specialty metal lathe CNC machines achieve higher productivity at a lower cost.

MJ60

Maximum Turning Diameter: 4.7 in
Number of Turret Stations: 8STA *No option
Total Machine Weight: 7,936.6 lb
Spindle Drive Motor: 11 kw
Spindle Speed Range: 4,500 RPM
Maximum Chuck Size: 8.0 in

MJ100_machine-only MJ100 machine only

MJ100

Maximum Turning Diameter: 13.8 in
Number of Turret Stations: 10 STA
Total Machine Weight: 11,904.9 lb
Spindle Drive Motor: 22 kw
Spindle Speed Range: 3,500 RPM
Maximum Chuck Size: 10.0 in

ML400

Maximum Turning Diameter: 7.9 in
Number of Turret Stations: 6STA
Total Machine Weight: 9,700.3 lb
Spindle Drive Motor: 15 kw
Spindle Speed Range: 3,500 RPM
Maximum Chuck Size: 8.0 in

IMPROVE YOUR PRODUCTIVITY

[contact-form-7 404 "Not Found"]