MURATA MACHINERY USA, INC.

MW80

As a super-compact twin spindle turning center, the MW80 reduces cycle times with its high-speed gantry and lightning-fast load/unload times. Designed for increased productivity, this machine is equipped with two horizontal spindles and twin four-station tool blocks. Though it has the same gantry speed as the MW50, the MW80 can accommodate slightly larger parts.

Boasting speeds of up to 6,000 RPM, the MW80 is the ultimate solution for the turning of high-speed parts. It’s a dual spindle turning machine and is built with two of Muratec’s proven high-speed gantry loaders, a feature that increases uptime and reduces overall cycle times. This machine is also incredibly flexible and has a wide gang tool platform for added versatility.

Delivering high speeds, shorter cycle time and reduced idle times, the MW80 is an optimal solution for high-speed turning. Like all Murata Machinery USA products, it can be automated to meet your specific part requirements. Contact us today to find out if the MW80 is the right option for you!

  • Product Sheet

The MW80 at a Glance

  • High-Speed Processing

Available with a twin gantry for high-speed processing of parts up to 80 mm in diameter.

  • Shorter Cycle Times

With its high-speed gantry, fast load/unload times, and reduced cycle times, the MW80 delivers shorter cycle times

  • Flexible Machining

The MW80 is incredibly flexible and has a wide gang tool platform for added versatility.

 

Total Machine Weight
8,818.5lb
Chuck Size
165
Max Spindle Speed
6000RPM
Spindle Diameter
3.1in
  • Standard
  • Metric
Maximum Spindle Speed
6000 rpm
Spindle Drive Motor
7.5 kW /30 min
Gantry Handling Capacity
Φ80 mm x 50 mm

MW80

  • 6 in
  • Tool Plate x 2, Width: 14.57 in
  • 6000 rpm *No option
  • 7.5 kW /30 min *No option
  • 8818 lb
  • Φ80 mm x 50 mm , up to 0.5kg/piece
  • Flat nose
  • X-axis 18 m/min | Z-axis 18 m/min

Get A Quote

Call: 888.846.1428

Maximum Spindle Speed
6000 rpm
Spindle Drive Motor
7.5 kW /30 min
Gantry Handling Capacity
Φ80 mm x 50 mm

MW80

  • 165 mm
  • Tool Plate x 2, Width: 370mm
  • 6000 rpm *No option
  • 7.5 kW /30 min *No option
  • 4000 kg
  • Φ80 mm x 50 mm , up to 0.5kg/piece
  • Flat nose
  • X-axis 18 m/min | Z-axis 18 m/min

Get A Quote

Call: 888.846.1428