MURATA MACHINERY USA, INC.

ML400

Designed specifically for the automated turning of shaft type production parts, the ML400 is a super compact shaft lathe allowing for automated turning of shaft parts up to 400 mm (15.7”) in length and up to 200 mm (7.9″) in diameter. For even longer parts, the machine’s sister model, the ML400L, can turn shaft parts up to 570mm (22.4”) in length and up to 200mm (7.9”) in diameter.

Reduced cycle times are a guarantee with the ML400, in addition to a quicker changeover of parts and fully programmable capabilities from one machine. In fact, the ML400 has the ability to program a variety of different parts at once, which is especially beneficial for clients with multiple parts and very specific positioning needs. The ML400 gives you the flexibility you need to get the job done, and get it done right.

Unlike similar machines, the ML400 is unique in that it uses a vertical bed, rather than a slant bed. This allows chips to drop directly into the conveyor, preventing hot chips from overheating the machine. What’s more, this machine consists of stainless steel hardcovers for chip guards, which prevents the risk of chip contamination.

Like all Murata machines, all parts are OEM, which allows you to get the service, support, and parts you need, from one location. The ML400 is easily automated and is available with one or two turrets, as well as with or without our high-speed, three-axis CNC gantry loader.

  • Product Sheet

The ML400 at a Glance

  • Two Models for Longer Shaft Part Capacity

The ML400 can turn shaft parts up to 400 mm (15.7”) in length and up to 200 mm (7.9″) in diameter, and the ML400L can turn shaft parts up to 570mm (22.4”) in length and up to 200mm (7.9”) in diameter.

  • Fully Programmable

The ML400 is easily automated and is available with one or two turrets, as well as with or without our high-speed, three-axis CNC gantry loader.

Maximum Turning Diameter
7.9in
Total Machine Weight
9,700.3lb
Maximum Chuck Size
8.0in

*When Milling function is chosen, 3 of 6 turret will be milling station.

ML400

  • 7.9in
  • 6STA ( 6STAx2 on the 2 turret spec)
  • 9,700.3lb
  • 15 kw
  • 3,500 RPM
  • 8.0in
  • 1.0kw *Option
  • 4,000RPM *Option
  • Φ60mm x 400mm , up to 5.0kg/piece
  • 15.7in
  • MT4
  • Z-Axis:Servo, X-Axis:Hydraulic *Option

Get A Quote

Call: 800.428.8469